RFQOrderSubmit ApplicationCatalog Request
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Products: Through Shaft Pilot Mount Clutches

   Print Page

Through Shaft, Ball Bearing Pilot Mount
Industrial Friction Clutches

Operation
  • Industrial friction clutch engages with air pressure, spring released when air is exhausted
  • Torque is linear in response to air pressure applied
Mounting
  • Through/Mid Shaft or End Shaft
  • Friction clutch slides on shaft and is fixed with set screws and a customer supplied key
  • Anti-rotation arm required to prevent rotation of the air housing
  • Friction Clutches are designed for horizontal mounting. If vertical mounting is required, consult engineering for options
Applications
  • Friction clutches are suitable for Connect/Disconnect and Cycling applications
  • Maximum RPM varies by model. Please consult the detail sheets (below). Consult engineering if the intended application exceeds the listed maximum RPM.
Design Features
  • Industrial friction clutches are bored to suit up to the maximum shown (US & Metric) for easy installation
  • Available with either high or low* coefficient friction linings for same price
  • Machined pilot for easy mounting of pulley or sprocket
Through Shaft Pilot Mount Clutches
Friction Clutch Repair Kits & Parts
Click here or view PDF detail sheets
below for more information.

Download Product Manual

Product No. Friction Lining Coefficent Torque @ 80 PSI (Lb-In) Maximum Bore with Standard Keyway
(Inches / Millimeters)
Length (Inches) Outside Diameter (Inches) Detail Sheet Request 3D CAD Model
C3A2R-STH High 555 1.000 / 24 5.05 3.50 View PDF request
C3A2R-STL Low* 370 1.000 / 24 5.05 3.50 View PDF request
C4A2R-STH High 1317 1.250 / 31 5.86 4.48 View PDF request
C4A2R-STL Low* 878 1.250 / 31 5.86 4.48 View PDF request
C5A2R-STH High 2587 1.438 / 38 6.28 5.69 View PDF request
C5A2R-STL Low* 1725 1.438 / 38 6.28 5.69 View PDF request
C6A2G-STH High 5397 2.000 / 52 7.38 7.63 View PDF request
C6A2G-STL Low* 3598 2.000 / 52 7.38 7.63 View PDF request

*Low coefficient lining models are offered for applications where a small amount of slip is required or a narrower torque range is necessary. For continuous slip or tension control applications, a SensiFlex® clutch should be used.

Additional Information

Mach III industrial friction clutch units are solidly constructed and feature hang-up resistant drives to provide reliable power transmission. The clutch pilot is machined for easy mounting of a sprocket or pulley in the field, or, Mach III can provide the sprocket, pulley or v-belt sheave pre-mounted on the industrial friction clutch when it ships from our factory. Friction clutch models can be adapted to accommodate customer needs. See our Custom Design Solutions page for more information. Mach III encourages contact with our engineering department before purchasing an industrial friction clutch for use in a new or retrofit application.