Rewind Tensioning Clutch Application Information

Contact Information

Please provide as much information as possible. We will be happy to assist you with questions: 859-291-0849

Specifications

1. Clutch is needed for:

New Machinery
Retrofit - to replace (Mfg., Model, Etc):

* 2. Shaft Specifications:

Shaft Size (specify inches / mm):
Keyway (specify inches / mm):

* 3. Pulley or Sprocket Requirements:

Pulley
        Type:
Sprocket
        Chain Size: # of Teeth:

* 4. Which will clutch drive when engaged (output) ?:

Sprocket or Pulley
Shaft

5. Operating Air Pressure Restrictions (if any):
        Minimum (PSI): Maximum (PSI):

6. Envelope Restrictions (if any):
        Maximum Length (specify inches / mm):
        Maximum OD (specify inches / mm):

Process Specifications:

1. Web Material:

2. Thickness (mil):

* 3. Web Width:
        Maximum (specify inches / mm):
        Minimum (specify inches / mm):

* 4. Linear Speed:
        Maximum (FPM / meters/sec):
        Minimum (FPM / meters/sec):

* 5. Roll Diameter:
        Core (specify inches / mm):
        Full Roll (specify inches / mm):

* 6. Total Tension / Pounds Per Lineal Inch:

Pounds Per Lineal Inch
        Maximum (PLI):
        Minimum (PLI):
Total Tension
        Maximum (lbs):
        Minimum (lbs):

7. Full Roll Weight (Specify lbs / kg):

* 8. % Drive Overspeed:

Constant
Increasing

9. Machine Acceleration Time: (seconds):

10. Taper (% if used):

11. Tension Control:

Manual
Automatic (Type):

12. Downtime between Processing (for roll change, etc.):

Additional Information
Please include any special requirements, environmental conditions, etc.