FAQ

Archive

Date	Title	Comments
2011-02-09	Which is better for my application, an air set or a spring set unit?	0
2010-03-19	Should I use a Bronze Bushing or Ball Bearing Pilot Clutch?	0
2010-03-11	How much air will my Mach III product consume?	0
2010-03-11	How do I machine a sprocket or pulley to mount on a Mach III product?	0
2009-11-21	The unit torque is rated at 80 psi; what is the torque at 25 psi?	0
2009-10-14	Can I get this product with a bore other than the size shown?	0
2009-10-01	The drawing says there is a wear-in period before the unit reaches its full torque rating. How long will this take?	0
2009-10-01	What is the threaded hole opposite the air inlet in my clutch for?	0
2009-10-01	How do I order repair parts?	0
2009-10-01	I need to replace another manufacturer's unit, what do I need to do?	0
2009-10-01	How do I identify my Mach III product?	0
2009-10-01	What is the expected life of my Mach III product?	0
2009-09-30	Who stocks Mach III products in my area?	0
2009-09-30	What is the lead time?	0
2009-09-30	Where are Mach III products manufactured?	0

15 posts
0 comments